Description
Four colour plus white images printed on film for easy transfer to any fabric using a heat press
Only $0.004 per square inch
To Get Started
- Click on the ‘Build a Gang Sheet‘ button
- Upload your image files
- Drag and drop your images into the canvas area to build your gang sheet
How it Works
- The minimum canvas length is 12 inches (30.48 cm)
- Canvas length increases as more images are added, to a maximum of 300 inches (762 cm)
- The canvas width is 22 inches (55.88 cm)
A Special Note About Uploaded Images
- Images must be 300dpi to ensure best printing resuls
- Simplify building your gang sheet by uploading images that are already sized (e.g. 8 x 10 inches)
- Your gang sheet will be printed exactly as it is submitted – double check everything before submitting
Application instructions:
- Set your press for 290°F (143°C)
- Cut out the DTF print to be placed from your gang sheet
- Place your garment on your heat press and Pre-press it to remove any moisture and flatten the fibres
- Carefully place the transfer on the garment where it will be pressed
- Protect the garment and your heat press by covering the transfer and the garment with a teflon sheet
- Parchment paper or butcher paper can also be used
- Do not use wax paper or any other coated paper
- Press the garment and transfer at 290°F (143°C) for 10 seconds under medium to firm pressure
- Open the press, remove the teflon sheet, and carefully peel away the film from the transfer
- Once the film has been removed, replace the teflon sheet and press again for 10 seconds.
- Open the press, remove the teflon sheet, and allow the garment and transfer to cool
Washing instructions:
- Turn the garment inside out to help protect the print
- Machine wash in cold or warm water
- Do not use bleach
- Hang to dry, or tumbler dry on low
- Do not iron the transfer
Reviews
There are no reviews yet.